Give your paper an embossed look.

Stenciling paste developed especially to create a relief on paper. The paste dries matt and can be painted arbitrarily. Many effects can be achieved: “colored on white” made by coloring the stenciled areas or “white on colored” achieved by sanding down the tainted embossed areas.

  • ideal in combination with Designo paper
  • the designed paper doesn’t ripple
  • color as desired
  • water based / acrylic based

Relief-Paperpaste preparation: Stir well before use!

Relief-Paperpaste processing:

Place a stencil on the paper sheet and apply the relief-paste thinly with a spatula. Lift off the stencil and, according to the layer thickness, then let the motif dry for about 2 to 6 hours.
After drying, sharp edges on the design can be smoothed with a rubber eraser or sandpaper, but only while the paste is not yet treated with solid paint, as it´s the case when using the 3D stamp paint. For a vintage look, grind lightly after coloration with sandpaper.

All tools should be cleaned with water.


Relief-Papierpaste color palette

  • 101-Antique-white101-Antique-white